ph meter for hydroponics


Digital Bluetooth Food PH Meter 0.00~14.00 High Accuracy Sensor Smart Temp Acidity Tester for Brewing Fruit Cheese Meat Canning

Digital Bluetooth Food PH Meter 0.00~14.00 High Accuracy Sensor Smart Temp Acidity Tester for Brewing Fruit Cheese Meat Canning


Digital Bluetooth Food PH Meter 0.00~14.00 High Accuracy Sensor Smart Temp Acidity Tester for Brewing Fruit Cheese Meat Canning

Digital Food PH Meter Features:

【BlueTooth Food PH Meter】Professional Bluetooth Food PH meter and intelligent connecting with APP, Full measure range: 0.00~14.00, Accuracy up to ±0.1ph.

【Set PH Measure Limit】Digital pH meters for food can be set with custom parameters. The app can set the upper and lower limits of pH, which can be set according to your own needs. When the value you set is out of the test range, the App interface will display a red value abnormally to notify you of any value that is out of the preset range.

【Automatic Temperature Compensation】Food PH tester has an automatic temperature compensation function(0.1°C~60.0°C), which can decrease the error caused by the change of liquid temperature.

【High-precision Puncture Electrode 】The PH sensor can measure the PH value of soft solids such as soil, cheese, meat, etc. responds quickly, measures accurately, and is corrosion-resistant, and the electrode can be replaced for easier maintenance.

【Wildly Food Testing Applications】PH Meter for meat, brewing food, canning food, beer brewing, food fermentation, brewing water, cheese, dough, soil, cosmetics, and other Solid and semi-fixed sample PH testing.

Professional Food PH Meter Specifications:

PH Range: 0.00~14.00pH

Resolution: 0.01pH

Accuracy: ±0.1pH.


Temp Range: 0.1℃~60.0℃, 32.1℉~140.0℉

Resolution: 0.1℃, 0.1℉

Accuracy: ±0.5℃.


Operation Environment: 0.1℃-80℃; RH:Max 90%

Battery: 4 * 1.5V(LR44),Not include ,Low battery warning

Size : 230 *42* 42mm

Display: LCD digital display

Backlight: APP Control

Temperature: Automatic Temperature Compensation 0-60℃

PH calibration: pH:6.86/4.00/9.18 or 7.00/4.00/10.01

Waterproof: IP67

NOTICE:

1. Food PH Meter has factory calibrated and can be used directly.

2. When finished, clean the PH sensor with pure water.

3. Gently stir several times to make sure there are no air bubbles around the electrode.

4. Do not disassemble the instrument without permission to avoid damage.

5. During the test, it is normal for the probe to generate resistance when it encounters air and the value jumps.

6. Be careful not to impact or collide with the electrode bulb, otherwise, it will cause rupture. If damaged, the electrode needs to be replaced.

Smart PH Tester APP Tips:

1. One page displays 3 items of data at the same time, which is convenient and quick to read the data.

2. The mobile phone APP controls the backlight or no backlight

3. Display battery percentage

4. The data can be kept or saved, and after saving, it can be exported as EXCEL sheet to a computer or mobile phone,and printing is supported.

5. Turn on auto save, and the data will be saved every 30 seconds.

6. The range of PH can be set freely, if the range is exceeded, it can be prompted

7, 2 kinds of calibration methods, the default is the Asian standard (4.01, 6.86, 9.18). If you need to calibrate the European mode (7.00, 4.00, 10.00), please switch the standard on the APP.

8. There are English and Chinese characters, which can be switched freely


PH Meter with APP Operation Steps:

1. Scan QR code and download the APP APK Click can switch between Chinese and English.

2. If need the blue tooth function,long press"ON/OFF"and open the blue tooth

3. Put the meter into standard solution and operate the functions

4. Save reading

PH Meter for food manufacturing:

Suitable for food processing, like fruit, meat, brewing food, canning food, beer brewing, food fermentation, brewing water, cheese, dough, soil, cosmetics, and other Solid and semi-fixed sample PH value testing.

Package List:

1 * PH Tester

5 * Calibration Powders

1* English Manual

FQA

Q: What type of battery does the product use? Are batteries shipped?

A: Products generally do not ship batteries, and online logistics cannot transport batteries. The type of battery is 4 * 1.5V (LR44) button battery. Please buy it locally.


Q: What should I do if the received product is damaged, cannot be calibrated, cannot work normally, and the meter cannot recognize the solution?

A: Please protect the product and contact us in time to report product problems



Soil pH Tester 3-in-1 PH Light Moisture Acidity Meter Soil Tester Moisture Meter Plant Soil Monitor Detector for Plants

Soil pH Tester 3-in-1 PH Light Moisture Acidity Meter Soil Tester Moisture Meter Plant Soil Monitor Detector for Plants









Soil pH Tester 3-in-1 PH Light Moisture Acidity Meter Soil Tester Moisture Meter Plant Soil Monitor Detector for Plants


Product Highlights:

【3-in-1 Moisture Meter】-You can use plant meter to measure the light, humidity and pH of the soil. The three-in-one function of the moisture meter can help you understand the soil condition in real time. The professional high-precision soil tester is More accurate measurement . This moisture meter for potted plants is Garden lover's gift.

【Accurate & Sensitive Soil ph Meter】 Moisture meter plants through double needle measurement, these two moisture probes can scientifically and accurately measure the moisture and pH value of vegetation, and sensitively detect changes in soil, so that plants can be planted with reliable data .

【Easy to Operate Soil Moisture Meter】 Soil moisture meter after inserting the Potted , You don't have to wait to see the data, plant ph tester 3-key switching, convenient and quick. The soil test kit relies on electrodes, does not require batteries, and has reliable data. moisture tester is an ideal tool for planting and gardening.

【Multiple Occasions Plant Meter 】The moister meter for plants Suitable for home garden breeding, rice planting, vegetable planting, forest planting, succulent soil,potted plants, flower planting, greenhouse planting, garden planting, soil testing,etc, moisture meter for potted plants meet all your needs for soil moisture testing.

【How to correctly test the soil ph 】:wait 10 minutes after watering, then plug and 5-10 seconds to read. Since only soil is fully moist, the double needle can react with H+ to generate an electric current to drive the ph needle.(If test soil light/moisture, just only plug and read, no more wait to read)





PH Meter 0.01 PH +Battery/Powder High Precision Water Quality EC Tester 0-14 PH Measurement Range for Aquarium Swimming Pool

PH Meter 0.01 PH +Battery/Powder High Precision Water Quality EC Tester 0-14 PH Measurement Range for Aquarium Swimming Pool

Product Description
PH meter is an instrument used to measure acidity or alkalinity of a solution - also know as pH. pH is the unit of measure that describes the degree of acidity or alkalinity. It is measured on a scale of 0 to 14.
There are different scales set by scientific rules to determine this. For instance, if the reading on PH meter is 7 then it is neutral. If it is above 7, then the element is basic and in the case of below 7 then it is acidic. So, this was the measurement criteria or we can say scale for checking the acidity or alkalinity.

Product Feature

Easy to Use: Simply immerse the pH meter electrode in the solution to be tested, readings are quickly display on a large lcd display.

Wide Application: Ideal instrument for any aquarium, the fishing industry, swimming pools, spa, school laboratories, food & beverage, drinking water etc.

Auto Calibrated: Features in-built calibration with 2 buffer powders(included).Just press a button to finish the calibration. This pH meter is factory calibrated. Users can use it directly.

Fast and Accurate Results: No need to work with those annoying color charts and test strips.

Compact Portable Design: Pocket fitting pH meter that's also lightweight and compact. Total concealed fit in your bag or pocket for easy, casual carrying.
Product Details
Two-point automatic correction
Automatic calibration using two points(pH4.00 pH6.86).Place the instrument in standard buffer and press the CAL calibration button to automatically identify the calibration solution and complete the calibration in 5 seconds.
Large screen display
Large screen displa,the reading is more clear and intuitive,stable value of 4~5 seconds, economical, suitable for the needs of acid and alkali testing in various industries.
Glass electrode
All reading are directly contacted with the test solution via antomatic temperature (AC) temperature sensor to make the readings more accurate and fast

Product Parameter

Product Name
PH meter
Range
0.0-14.0PH
Resolution
0.01PH
Temperature compensation
0℃ -50℃
Operating Temperature
0℃ -60℃
Calibration
One-Point or Two-Point
Accuracy
±0.01PH
Power Supply
2*1.5V (LR44 Button Cell)
Dimension
155*31*18mm
Weight
50g(1.7OZ)
Service
OEM ODM
Color
Yellow,Blue,or customer required colors

Why pH Measurements Are Important

Chemicals reactions in water are affected by the acidity or alkalinity of the solution. This is important not only in the chemistry lab, but in industry, cooking, and medicine. pH is carefully regulated in human cells and blood. The normal pH range for blood is between 7.35 and 7.45. Variation by even a tenth of a pH unit may be fatal. Soil pH is important for crop germination and growth. Acid rain caused by natural and man-made pollutants changes the acidity of soil and water, greatly affecting living organisms and other processes. In cooking, pH changes are used in baking and brewing. Since many reactions in everyday life are affected by pH, it's useful to know how to calculate and measure it.

How to use

1.Remove protective cap.
2.First rinse the electrode with distilled water and suck it with filter paper.
3.Turn the meter on by pressing “ON/OFF” key.
4.Immerse the pH meter electrode in the solution to be tested (should not be over the immersion line).
5.Stir gently and wait around 30 seconds till the reading stabilizes.
6.After finishing, clear the electrode with pure water, turn the meter off by pressing “ON/OFF” key.
7.Always replace the protective cap after use.

Kindly Reminder

If the tester was used or lay aside long time: recalibrate it.
If you open battery case or replace battery: recalibrate it.
The glass bulb of the electrode is fragile.
Don't touch it by hard tools and fingers, suck the water on it gently when cleaning.

Warranty

1.12 months Manufacturer`s limited Warranty for defective items (excluding items damaged and/or misused after receipt).
Accessories come with a 3-month warranty.
2.Defective items MUST BE reported and returned within the warranty period (and in the original packaging, if possible). You must
tell us what the defect is and give us your order number. WE DO NOT REPAIR OR REPLACE ITEMS WITH AN EXPIRED WARRANTY.
Packing & Delivery

Packaging



2 in 1 Soil PH Fertility Meter With 3 Probes Soil PH Tester Plant Fertile Measure Device Acidity Meter For Garden

2 in 1 Soil PH Fertility Meter With 3 Probes Soil PH Tester Plant Fertile Measure Device Acidity Meter For Garden

Note:
1. Avoid touching stones; do not insert with too much force; clean the electrode in time after using; never immerse into water for testing.
2. Do not insert into soil for long time to avoid damage.
3. Size and color may be slightly different due to manual measurement and different light conditions. Thanks for understanding.

Fertility Testing:
1. First remove about 5 cm of topsoil, then mash the soil down to a depth of 13cm and clean any organic impurities that could affect test results in the soil, such as leaves, roots, etc.
2. Moisten the soil with water before testing.
3. Clean the probes with wipe or tissue.
4. Select the fertility testing mode.
5. Insert the electrode (above 60mm) into soil, wait for about 10s and read the value.
6. Record data. Remove the tester from the soil, clean and dry the probes.

PH Testing:
1. First remove about 5 cm of topsoil, then mash the soil down to a depth of 13cm and clean any organic impurities that could affect test results in the soil, such as leaves, roots, etc.
2. Moisten the soil with water before testing (better use rainwater or distilled water).
3. Select the PH testing mode.
4. Moisten 3 probes and clean the right probe with wipe or tissue.
5. Insert the whole electrode into soil, wait for about 1 minute and read the value.
6. Record data. Remove the tester from the soil, clean and dry the probes.

The criteria for judging the results of the analysis are as follows


(TOO LITTLE)

Nitrogen is less than 50 ppm

Phosphorus is less than 4 ppm

Less than 50 ppm of potassium


(IDEAL)

50-200 ppm

4-14 ppm

50-200 ppm


(TOO MUCH)

More than 200 ppm

More than 14 ppm

More than 200 ppm


5 in 1 PH Tester TDS/EC/PH/Salinity/Temperature Meter Digital Water Quality Monitor Tester for Pools, Drinking Water, Aquariums

5 in 1 PH Tester TDS/EC/PH/Salinity/Temperature Meter Digital Water Quality Monitor Tester for Pools, Drinking Water, Aquariums

5 in 1 PH Tester TDS/EC/PH/Salinity/Temperature Meter Digital Water Quality Monitor Tester for Pools, Drinking Water, Aquariums

【5-in-1 Water Quality Tester】

This is a new multi-functional water quality test instrument, which can measure pH, TDS,EC, salinity value and temperature. The measurement range is large and wide, which can measure Home water salinity and sea salt, food, farming, fish pond, soup, seawater and so on.

Feature

1.Automatic shutdown function
2.Screen with backlight
3.large screen display
4.Automatic temperature compensation
5.water-proof
6.Automatic calibration

Specification

TDS measurement range: 0-1000ppm.
EC measurement range: 0-10000US/cm.
PH measurement range: 0.01-14.00pH.
Salt water meter measuring range: 0.00-25.00%.
Temperature measurement range: 0°C-60°C
Material: main body ABS plastic + electrode probe

Power Supply: 3 x LR44 Button Battery (Included)

【4-in-1 Water Quality Tester】

This pH meter can measure PH, TDS, EC & temperature

Feature

1.High-accuracy algorithm chip and electrode of our digital water ph tester ensure accurate and fast response.
2.Green Backlit LCD Design guarantees that you can read the measuring results in any condition.
3.With high sensitive glass probe, you can get a full measurement range of 0-14pH.
4.You can use this Pocket Size small but powerful Pen Tester, device to measure your aquarium, pool, pond in a garden, etc.

Specification

EC Measuring range: 0 to19999uS/cm
Resolution: 1uS/cm; 0.1 mS/CM;
Accuracy: ±2% of reading

TDS Measuring range: 0 to 9990ppm
Resolution: 1ppm;0.1ppt
Accuracy: ±2% of reading

PH Measuring range: 0.01-14.00pH
Resolution: 0.01pH
Accuracy: ±0.05pH

temperature range: 0.1-60.0℃ 32.0-140℉
Resolution: 0.1℃/0.19℉
Accuracy: ±0.5℃

【3-in-1 Water Quality Tester】

For testing Total dissolved solids/pH/water quality testing
⊙pH: 0.01 high precision, automatic calibration, automatic temperature compensation, one calibration can be used for one month, convenient and fast
⊙TDS/EC: The measurement range is 20000ppm/μs, with high precision in large range

Specification

EC measurement range: 1-19999uS/cm
TDS measurement range: 1-19999ppm
pH measurement range: 0.01-14PH
Resolution: 0.01PH
Accuracy: soil 0.05PH
Automatic calibration:
EC: Three-point calibration optional (1413uS/cm, 12.88mS/cm, 111.8mS/cm)
PH: Automatic identification of standard solutions (4.01, 6.68, 9.18)
Temperature Compensation: ATCO-60°
Battery 1.5*3 (LR44)include
Operating Environment: 0-60°C (32-140°F)
Size: 183*37MM
Automatic shutdown: 5 minutes automatic shutdown
Waterproof grade: IP67 (anti-short immersion)

Package include

1*pH Meter
3*Calibration powder


Digital 4 In 1 Soil PH Meter Moisture Monitor Temperature Sunlight Tester for Gardening Plants Farming with Blacklight

Digital 4 In 1 Soil PH Meter Moisture Monitor Temperature Sunlight Tester for Gardening Plants Farming with Blacklight

4 in 1 Function

Soil pH Tester, 4 in 1 PH Light Moisture Acidity Tester Soil Tester Moisture Meter Plant Soil Tester Kit for Flowers

Test object: current light intensity, soil moisture, soil PH value, soil temperature
The four-in-one soil analyzer is mainly used to test soil ph, moisture and humidity, temperature and plant light intensity. It USES a 9V carbon battery with a simple operation and a probe length of 200mm.
The instrument displays the parameters measured by liquid crystal display.
The instrument also has the function of low power indication and automatic power cut off.
It saves time and energy and is efficient.
This instrument is suitable for planting flowers and grass and landscaping.

Specifications:

1.The product can measure the current light intensity (Low, LOW, LOW +, NOR, NOR, NOR +, hGH, HGH, HGH +) environment;
2.Moisture content measurement (DRY +, DRY, NOR soil, WET, WET +);
3. Measurement of floor temperature, temperature range: -9 ~ + 50 ℃ (16 ~ 122 ℉), degrees Celsius and degrees Fahrenheit can be switched (accuracy by the legend: 1 ℃ / 1 ℉);
4. measured soil pH, PH measurement range: 3.5-9.0"
5.Size:122mm*63mm*36mm
6.battery:1*9V battery(not included)
Large screen LCD user interface


4 in 1 Soil Tester Sunlight Moisture Temperature Digital Meter Gauge Gardening Humidity Testing Soil Moisture PH Meter

4 in 1 Soil Tester Sunlight Moisture Temperature Digital Meter Gauge Gardening Humidity Testing Soil Moisture PH Meter

Description:
Multifunctional: This kind of soil tester can be used to test the sunlight, moisture, temperature and PH, meeting your different needs at a time.
LCD display: The digital screen will show you the testing data easily, convenient for you to read the data quickly, you can use the soil meter without worries.
Adjustable: This soil temperature gauge gas 2 measuring units, you can adjust the displaying unit according to your needs, making your planting and gardening easier.
Wide use: Suitable for indoor and outdoor gardening, this soil thermometer is suitable for plants, vegetables, flowers and others, helping you know the plant condition.
Battery operated: Powered by 9V battery, this soil test instrument is easy to use, and it will remind you of the low battery, and it will be off if there is no operation for about 5min.


Specification:
Material: ABS.
Color: show as pictures.
Size: show as pictures.
Sunlight: LOW-, LOW, LOW+, NOR-, NOR, NOR+, HGH-, HGH, HGH+.
Moisture: DRY+, DRY, NOR, WET, WET+.
Temperature range: -9-50℃(16-122℉).
Temperature accuracy: about 1℃/1℉.
PH range: 3.5-9.0.
Work temperature: 5℃-40℃.
Battery: 9V battery(not included).


Note:
Due to the light and screen difference, the item's color may be slightly different from the pictures.
Please allow a slight deviation for the measurement data and make sure you do not mind before ordering.


Package Includes:
1 Piece Soil Tester.



PH Meter & TDS Meter Digital Water Quality Tester 0-14 PH Meter Tester 0-9990PPM TDS&EC LCD Water Purity PPM Aquarium Filter

PH Meter & TDS Meter Digital Water Quality Tester 0-14 PH Meter Tester 0-9990PPM TDS&EC LCD Water Purity PPM Aquarium Filter

PH Meter & TDS Meter Digital Water Quality Tester 0-14 PH Meter Tester 0-9990PPM TDS&EC LCD Water Purity PPM Aquarium Filter


About this item

【EASY READING BIG BACKLIT LCD DISPLAY & QUALIFIED WATER TESTER】: This water quality meter with Big Backlit LCD is far superior than other ones, which allows wider angles of data reading and night reading.

【RELIABLE WATER TESTER -- ACCURATE & QUICK 】: Equipped with premium quality &sensitive probe, This water quality tester enables quick and convenient test. Put the probe into water and LCD shows accurate results in seconds.

【AUTOMATIC TEMPERATURE COMPENSATION 】: No more need to worry about the temperature of to-be tested liquid, as PH meter & TDS meter has built in (ATC) automatic temperature compensation, so that it can accurately determine pH & TDS value of the sample at any temperature in a range of 32°F - 140°F (0°C - 60°C).

【EASY CALIBRATION】: This PH pen is featured with auto temperature compensation which can be adjusted to water temperatures and water quality to give PH readings almost instantly. As well, the tester can be tested with using Buffer Powder.

【WIDE USAGE】: Pocket Size PH meter & TDS meter is the ideal water tester for water, pools, aquariums, spas, hydroponics, food, wine and beer making and more.


TDS Meter Digital Water Tester 0-9990ppm Drinking Water Quality Analyzer Monitor Filter Rapid Test Aquarium Hydroponics Pools

TDS Meter Digital Water Tester 0-9990ppm Drinking Water Quality Analyzer Monitor Filter Rapid Test Aquarium Hydroponics Pools

TDS Meter Digital Water Tester 0-9990ppm Drinking Water Quality Analyzer Monitor Filter Rapid Test Aquarium Hydroponics Pools
Description:
The TDS Meter is a great tool for home and professional use to determine the ppm (parts per million), Ideal for a variety of professional and home uses such as drinking water, hydroponics, aquariums, aquaculture, pool & hot tub, spa, car wash, food & beverage, coffee, kombucha, laboratory & scientific, colloidal silver, ecology testing, laboratory & scientific, and more!
Feature:
1.Simple to use, insert the probe into the measured water, you can know the quality of water, convenient to use at home.
2.Lock function, manually lock measurements for convenient reading and recording.
3.Fast and accurate readings. Large LCD display makes it easy to read.
4.Handheld pen style makes it conveniently fits in your pocket or bag. Can test purity of the water quality at any time.
5.Made of ABS plastic, durable and lightweight. Waterproof design, lower power procesor.
What is TDS?
TDS stands for Total Dissolved Solids, which are the inorganic salts and organic matter in a liquid. This includes calcium, magnesium, sodium, etc.
Specifications:

Material: ABS Plastic
Color: White
Size(LxW): About 13.8x2.3cm
Measuring Range: 0-9990ppm
Measurement accuracy: ± 2%
Voltage: 3V

Battery: 2x LR44(Not included)
Note:
● Do not immerse meter in liquid beyond the maximum immersion level of 4 cm.
● Do not store meter in high temperatures or in direct sunlight.


80 Strips/pack PH Test Strips Full PH Meter PH Controller 1-14st Indicator Litmus Tester Paper Water Soilsting Kit Factory

80 Strips/pack PH Test Strips Full PH Meter PH Controller 1-14st Indicator Litmus Tester Paper Water Soilsting Kit Factory

 

Household PH Meters Indicator Paper 2015 Hot Sale PH Value 1-14 Litmus Testing Paper Tester

 

 

 

aeProduct.getSubject()

This pH tester kit allows you to accurate test the pH of various substances including foodstuff, Aquarium/Water, Urine, Soil etc.
• Approximate size of pack 70 x45mm
• PH 1-14 Colour chart in each pack
• Litmus Paper test strips change colour within 15 seconds to be matched with the pH scale colour chart
Scales is as follows:-
• 1-3 Indicates a very high Acidic Substance
• 4-6 Indicates an Acidic Substance
• 7 Indicates Neutral
• 8-11 Indicates an Alkaline Substance
• 12-14 Indicates a very high level of Alkalinity

 

 

aeProduct.getSubject()

IMG_9118 (2)IMG_9118IMG_9124IMG_9125IMG_9134IMG_9150

 

 

 

 

 

 

 

 

 

Welcome to my store! Enjoy your shopping time! Best wishes to you!

 

Shipping

 

Attention, Please! We are international seller from China mainland. Please be patient! If you have any question or any special request, do please contact us. We will reply in 24 hours due to the time difference between us, thanks for your understanding.

 

Feedback

 

Since your feedback is very important to us, we sincerely invite you to leave positive feedback for us if you are satisfied with our product and service. It will just take you one minute. Thank you! If you are not satisfied with our product and service, please kindly contact us before leaving any negative and neutral feedback. We will try our best to satisfy you. Thank you very much!

 

'

  • strapless v neck dress
  • red pc case
  • skating hip pads
  • 3rd brake light camera
  • tight white jeans
  • sexy sport panties
  • sexy bikini panties
  • star trek necklace
  • indoor plant kit
  • data file
  • metallic gold sneakers
  • t shirt black colour